As an Affiliate, We may earn a commission that doesn't cost you extra from qualifying purchases using links in this post. It helps keeps this blog running.
Of course, you are ready to get your glow on, I don’t have to ask. But the question is if you have ever gone tanning without goggles?
You’ll agree it’s not a very pleasant experience as your eyes start stinging and watering almost immediately, and keeping your eyes open is really hard.
Anytime you are ready to get your glow on, tanning goggles are your essential companion for a safe, pleasant tanning experience. Whether your summer plans involve lounging by the pool, hitting the beach, or just catching some rays in your backyard, it’s vital to protect your eyes, and I don’t mean with sunscreen (although that’s a must, too for the skin). Tanning goggles are a great way to avoid getting those telltale sunburn lines on your face and also get rid of raccoon eyes.
But after getting one, how do you go about assembling them and putting everything together?
Read A Specific Section
How To Put Together And Assemble Tanning Bed Goggles (Sunbed Goggles)
Before you begin tanning, it’s imperative that you assemble your goggles properly. Not only will this help to protect your eyes from harmful UV rays, but it will also ensure that you get the best possible tan without tan lines. Thankfully, putting together tanning bed goggles is a relatively simple process.
Total Time: 2 minutes
Get your Goggle
First, get the tanning goggles and the strap
Snap the Lens
Then locate the two lens halves and snap them together into their individual eye socket holes on the sunbed goggle.
Thread the head strap
Next, locate the head strap and thread it through the holes in the goggles.
Buckle the strap
Now put the two ends of the strap together and buckle it. If there’s no buckle to hold it in place, then tie a knot in the strap to secure it
Put it on and Adjust
Finally, put the tanning goggles on your head and adjust the straps so that they are snug but comfortable, and you’re ready to tan!
There you have it! Now that you know how to put together tanning bed goggles, there’s nothing stopping you from achieving the perfect bronze glow. Be sure to practice this process a few times so that you can do it quickly and easily when you’re ready to hit the pool or the beach. Also remember to always wear sunscreen, even when you’re inside a tanning bed!
Can You Replace Tanning Goggle Strap?
Yes, you can replace your tanning goggle strap, and it’s easier than most people think.
Although some tanning goggles have just the eye cups like the Super Sunnies Slim Flex UV Eye Protection so as to reduce the chance and completely get rid of tan lines. However, some sunbed goggles will have a plastic strap that goes around the back of your head, holding the lenses in place like the Angrycat See Through Tanning and UV Protective Eye Goggles.
Even though most people never give a second thought to the straps on their tanning goggles, for those who frequently use tanning beds, they can be a real nuisance. The straps can become loose, uncomfortable, or even broken. This is because most of the straps are not very durable, and they can break easily if they get caught on something or if they are pulled too tight.
Fortunately, it is usually pretty easy to find replacement straps for tanning goggles. You can usually find them online or at a local beauty supply store, if not you can pick one of the Frienda 10 sets bungee cord goggle strap kits for goggles, with cord lock clamp. The straps are usually made of silicone or another type of elastic material, and they should be able to stretch to fit over your head without being too loose.
Once you have found a replacement strap, all you need to do is remove the old one and put the new one in its place. In most cases, it may be necessary to use a small screwdriver or other tools to remove the old strap, but this is usually not difficult as you will be able to do this without having to replace the entire goggle.
With just a few minutes of work, you can have your tanning goggles feeling like new again.
How To Put A Strap and Tie Tanning Goggles
If you’re using tanning goggles, it’s important to make sure they’re secure so that they don’t slip off while you’re in the middle of your session.
Below is how to put a strap and tie tanning goggles:
- First, make sure the string is long enough to go around your head and tied in a comfortable, secure knot.
- Next, fit the goggles over your eyes and find the two small notches at the side of the goggles where the string will go.
- Thread the string through both notches of the goggle, making sure that the knot is on the side that will sit against your face until the goggles are snug against the face.
- Either tie the string in a knot or pull the strap tight and buckle it behind your head.
- Finally, check to make sure that the lenses are in place and that there are no gaps around the edges, and then proceed to adjust for a comfortable fit so you can enjoy your tanning session!
What Is The String On Tanning Goggles Used For?
The strap or string on tanning goggles is used to secure the goggles to your head and keep them in place during your tanning session. Tanning goggles are designed to protect your eyes from harmful UV rays, and the string helps to ensure that the goggles stay in place during your tanning session. The strap is also adjustable, so you can find the perfect fit for your head. While the string may seem like a small detail, it can actually make a big difference in the comfort and effectiveness of your tanning goggles. So next time you’re getting ready to hit the tanning bed, make sure to adjust the string on your goggles for the perfect fit.
How To Keep Tanning Goggles From Slipping And Falling Off.
Tanning goggles are obviously designed to protect your eyes from the harmful ultraviolet rays emitted by tanning beds. However, these goggles can sometimes slip and fall off your eyes, exposing your eyes to dangerous rays while using the tanning bed.
There are a few reasons why tanning goggles fall off and they are:
1) The goggles may not be a good fit.
To ensure your tanning goggle is a good fit, make sure to try on a few different pairs of goggles and pick the one that is properly snugged against your face before you buy it, this is to ensure it’s a comfortable fit and it doesn’t slip down.
2) The straps are too loose.
If the straps of your tanning goggles are not tight enough, the goggles will be able to move around on your head, making it more likely for them to slip off.
3) Excessive sweating
If you sweat a lot during your tanning session, the moisture can cause the goggles to slide.
4) Too much head movement
Finally, if you move your head too much during your tanning sessions in the tanning bed, the straps can loosen and cause the goggles to fall off.
To prevent your tanning goggles from falling off, be sure to:
- Make sure the goggles fit properly on your face before using them for your tanning session. If they don’t, simply adjust the straps to ensure a tight fit.
- Tighten the straps around the head to keep them in place.
- Place the goggles over the eyes and ensure they are sitting flush against the skin.
- Try to keep your head still and avoid excessive movement while wearing the goggles to reduce the chances of them slipping off.
- If you need to adjust the goggles during your tanning session, do so carefully to avoid dislodging them.
By taking these precautions, you can help ensure that your tanning goggles don’t slip and your eyes are fully protected from harmful UV rays.
I’m Akin, your dedicated Editor-in-Chief and a fervent skincare enthusiast. Self-care is my true passion, and each year, I embark on a thorough exploration of self-tanning products, ranging from lotions to mists. This forms the bedrock of our commitment to delivering top-notch information to our readers. My extensive research and precise product rankings empower you to make informed decisions tailored to your specific skincare needs.
Unlock the Secrets to Achieving Your Ideal Tan with This Comprehensive Checklist